GoodingAluminium/L30/270/SV/IV

Gooding Aluminium Limited	Specification Clauses
	© 2006 Gooding Aluminium Limited

To complete the clause, select the appropriate wording from below. Highlighted text can be ‘dragged and dropped’ to save typing.

L30 STAIRS/ LADDERS/ WALKWAYS/ HANDRAILS/ BALUSTRADES

270 STAIRS

Gooding Aluminium supply aluminium alloy tread grip sheet to suit various applications.
Treads
Patterned sheet (Lozenge design)

Tread grip
Aluminium alloy ‘lozenge’ design plates for a use as stair and floor decking on suitably supported structures
Available in 2.0mm material thickness
Consult with Gooding Aluminium technical literature at www.goodingalum.com
for details.

Treads:
Supplier: Gooding Aluminium Ltd., 1, British Wharf, Landmann Way, London SE14 5RS. England. Tel 020 8692 2255. Fax. 020 8469 0031. Email: sales@goodingalum.com Web: www.goodingalum.com
Product reference: Patterned sheet (Lozenge design)
Ref: GA HGP1601 – Mill finish – Material thickness 2.0mm
Ref: GA HGPS1601 - Ano-Sil anodised finish – Material thickness 2.0mm
Edge treatment: For details refer to www.goodingalum.com
Method of fixing panels: Brackets and frames can be fabricated to suit individual applications.

Guarding:
Gooding Aluminium manufacture a wide range of perforated aluminium sheets and fixings to suit most applications.
Click on the name below to jump to the product and specification details
Round holes/ staggered pitch
Round holes/ square pitch
Square holes/ square pitch
Hexagonal holes/ staggered pitch
Single slots / staggered pitch
Single slots / parallel pitch
5 slot sets / 45º arrangement
5 slot sets / 90º arrangement
Special patterns

Round holes/ staggered pitch
A range of aluminium sheets perforated with round holes with a staggered pitch pattern.
Hole diameter ranges from 3.0 mm to 31.7 mm.
Material thickness ranges from 2.0 mm to 3.0 mm.
Consult with Gooding Aluminium technical literature at www.goodingalum.com for details.

Guarding:

Manufacturer: Gooding Aluminium Ltd. 1, British Wharf, Landmann Way, London SE14 5RS. England. Tel: 020 8692 2255. Fax: 020 8469 0031. Email: sales@goodingalum.com Web: www.goodingalum.com
Product reference: Perforated aluminium - round holes/ staggered pitch
Ref: GA P1632 – Hole diameter 3.0 mm, Open area 23% - Material thickness 2.0 mm
Ref: GA P1603 – Hole diameter 3.0 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1604 – Hole diameter 3.0 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1633 – Hole diameter 3.0 mm, Open area 50% - Material thickness 2.0 mm
Ref: GA P1695 – Hole diameter 4.7 mm, Open area 21% - Material thickness 2.0 mm
Ref: GA P1606 – Hole diameter 4.7 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1607 – Hole diameter 4.7 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1648 – Hole diameter 4.7 mm, Open area 40% - Material thickness 3.0 mm
Ref: GA P1649 – Hole diameter 4.7 mm, Open area 40% - Material thickness 3.0 mm
Ref: GA P1609 – Hole diameter 4.7 mm, Open area 49% - Material thickness 2.0 mm
Ref: GA P1697 – Hole diameter 6.3 mm, Open area 29% - Material thickness 2.0 mm
Ref: GA P1683 – Hole diameter 6.3 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1681 – Hole diameter 6.3 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1640 – Hole diameter 6.3 mm, Open area 40% - Material thickness 3.0 mm
Ref: GA P1641 – Hole diameter 6.3 mm, Open area 40% - Material thickness 3.0 mm
Ref: GA P1699 – Hole diameter 6.3 mm, Open area 49% - Material thickness 2.0 mm
Ref: GA P1684 – Hole diameter 9.5 mm, Open area 35% - Material thickness 2.0 mm
Ref: GA P1685 – Hole diameter 9.5 mm, Open area 35% - Material thickness 2.0 mm
Ref: GA P1642 – Hole diameter 9.5 mm, Open area 35% - Material thickness 3.0 mm
Ref: GA P1643 – Hole diameter 9.5 mm, Open area 35% - Material thickness 3.0 mm
Ref: GA P1686 – Hole diameter 12.0 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1688 – Hole diameter 12.0 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1690 – Hole diameter 15.0 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1691 – Hole diameter 15.0 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1692 – Hole diameter 19.0 mm, Open area 40% - Material thickness 2.0 mm
Ref: GA P1672 – Hole diameter 22.2 mm, Open area 44% - Material thickness 2.0 mm
Ref: GA P1673 – Hole diameter 22.2 mm, Open area 44% - Material thickness 3.0 mm
Ref: GA P1626 – Hole diameter 31.7 mm, Open area 44% - Material thickness 2.0 mm
Ref: GA P1636 – Hole diameter 31.7 mm, Open area 44% - Material thickness 3.0 mm
Edge treatment: For details refer to www.goodingalum.com
Method of fixing panels: Brackets can be fabricated to suit individual applications.

Round holes/ square pitch
A range of aluminium sheets perforated with round holes with a square pitch pattern.
Hole diameter ranges from 3.0 mm to 31.7 mm.
Material thickness ranges from 2.0 mm to 3.0 mm.
Consult with Gooding Aluminium technical literature at www.goodingalum.com for details.

Guarding:

Square holes/ square pitch
A range of aluminium sheets perforated with square holes with a square pitch pattern.
Hole sizes ranges from 6.3 mm sq. to 19.0 mm sq.
Material thickness ranges from 2.0 mm to 3.0 mm.
Consult with Gooding Aluminium technical literature at www.goodingalum.com for details.

Guarding:

Hexagonal holes/ staggered pitch
A range of aluminium sheets perforated with hexagonal holes with a staggered pitch pattern.
Hole sizes 9.0 x 10.4 mm.
Material thickness 2.0 mm.
Consult with Gooding Aluminium technical literature at www.goodingalum.com for details.

Guarding:

Single slots / staggered pitch
A range of aluminium sheets perforated with single slots with a staggered pitch pattern.
Hole sizes ranges from 20.0 x 4.0 mm to 25.0 x 6.0 mm.
Material thickness 2.0 mm.
Consult with Gooding Aluminium technical literature at www.goodingalum.com for details.

Guarding:

Single slots / parallel pitch
A range of aluminium sheets perforated with single slots with a parallel pitch pattern.
Hole sizes ranges from 20.0 x 4.0 mm to 25.0 x 6.0 mm.
Material thickness 2.0 mm.
Consult with Gooding Aluminium technical literature at www.goodingalum.com for details.

Guarding:

5 slot sets / 45º arrangement
A range of aluminium sheets perforated with 5 slot sets with a 45º arrangement.
Hole size 25.0 x 2.5 mm.
Material thickness 2.0 mm.
Consult with Gooding Aluminium technical literature at www.goodingalum.com for details.

Guarding:

Manufacturer: Gooding Aluminium Ltd. 1, British Wharf, Landmann Way, London SE14 5RS. England. Tel: 020 8692 2255. Fax: 020 8469 0031. Email: sales@goodingalum.com Web: www.goodingalum.com
Product reference: Aluminium sheets perforated with 5 slot sets with a 45º arrangement.
Ref: GA PSL542 – Hole size 25.0 x 2.5 mm, Open area 39% - Material thickness 2.0 mm
Edge treatment: For details refer to www.goodingalum.com
Method of fixing panels: Brackets can be fabricated to suit individual applications.

5 slot sets / 90º arrangement
A range of aluminium sheets perforated with 5 slot sets with a 90º arrangement.
Hole size 25.0 x 2.5 mm.
Material thickness 2.0 mm.
Consult with Gooding Aluminium technical literature at www.goodingalum.com for details.

Guarding:

Manufacturer: Gooding Aluminium Ltd. 1, British Wharf, Landmann Way, London SE14 5RS. England. Tel: 020 8692 2255. Fax: 020 8469 0031. Email: sales@goodingalum.com Web: www.goodingalum.com
Product reference: Aluminium sheets perforated with 5 slot sets with a 90º arrangement.
Ref: GA PSL592 – Hole size 25.0 x 2.5 mm, Open area 39% - Material thickness 2.0 mm
Edge treatment: For details refer to www.goodingalum.com
Method of fixing panels: Brackets can be fabricated to suit individual applications.

Special patterns
A range of aluminium sheets perforated with special patterns.
Hole sizes ranges from 10.0 mm width. to 15.0 mm oval.
Material thickness 2.0 mm.
Consult with Gooding Aluminium technical literature at www.goodingalum.com for details.

Guarding: