GA Ano-Sil Anodised Finish (on Aluminium Alloy Extrusion):
Independent Test Results

Resistance to Surface Marking:
4 passes compared with
1 pass for mill finish

The above results show GA Ano-Sil Anodised Finish being 4 times more resistant to surface marking than mill finish.

For more detailed results click here

Step-Up Stair Nosing/Tread - Bevelled (Click on the image for more detail)

More images

Your Basket

0 item(s)
Total: £0.00
incl. VAT

View Basket

Free
Delivery

on all online orders

 

More about deliveries

Free
Samples


dispatched within 24 hours

More about ordering samples

Dot Matrix Tread Inserts - Independent test results:

GA Mill = Mean Slip Resistance value 96
GA Ano-Sil Anodised = Mean Slip Resistance value 94

Test results identified the dot matrix pattern performing as well as the most slip resistant types of clay pavers. (BS 7976-2:2002. BS EN 1344:2002).

For more detailed test results click here.

Back edge detailing

Raked

Raked
Normally laid over a hard substrate

with

Square
Normally used with materials having a compressed thickness of 5mm. A suitable bevelled underlay can be used to bring the flooring surface to the required height.

Bevelled

Bevelled
Normally used with materials having a compressed thickness of 3mm. A suitable bevelled underlay can be used to bring the flooring surface to the required height.

Fixing and Maintenance Details:

Click here to refer to the Fixing and Maintenance details for Stair Trims.

Illustrations are not shown at actual size

Dimensions in mm

Profiles 6063T5 Inserts 5005 H14.

Suitability: Interior dry conditions only.

Not to be used in moist/wet environments.

NB: Slip resistance will be impaired by water, grease, oil or other contaminants.