Gooding Aluminium | Aluminium Products | Order Aluminium Samples here

Posi-Grip Instant Access - Independent test results:

Wind Load Positive Pressure - FP* = 15.00kPa
(equates to wind speed of 350mph)
Wind Load Negative Pressure - FP* = 1.48kPa
(equates to wind speed of 107mph)

The above results show Posi-Grip Instant Access performance levels comfortably exceeding any internal air pressures that are likely to be encountered in buildings.

FP* = Failure Pressure

For more detailed results click here

Panel Fix - Independent test results:

GA WP1 - FP* = 20.5KN.m
GA WP2 - FP* = 9.8KN.m

These load results clearly demonstrate the strength of the GA Panel Fix system. The type of fixings used (screws/bolts) and load bearing qualities of the substrate will also effect & determine load performance.

FP* = Failure pressure

Click here for more detailed test results.

BC1 Double Folded Trays with GA Ver T Fix System

BC1 Double Folded Trays with GA Ver T Fix System

Watch video presentation

BC1 Double Folded Trays with GA Ver T Fix System Video

Watch the BC1 Double Folded Trays with GA Ver T Fix System video now.

More images

Enquiry checklist
Please provide the following information:

  • Product ref: BC1
  • Panel sizes: Height and width (18mm o/a return unless otherwise specified)
  • GA sheet code or special pattern details (2mm thick material)
  • Plain border margin dimensions (If not minimal)
  • Number of panels
  • Surface finish for panels and Ver T Fix (if different): Anodised, satin brushed, powder coated, mill

Your Basket

0 item(s)
Total: £0.00
incl. VAT

View Basket

GA Processing

Bar/Counter Cladding Fixing Instructions

Please use the links below for fixing instructions on any of our Bar/Counter Cladding products.

Ver T Fix - Independent test results:

Wind Load Positive Pressure - FP* = 3.23kPa
(equates to wind speed of 162mph)
Wind Load Negative Pressure - FP* = 0.65kPa
(equates to wind speed of 72mph)

The above results show Ver T Fix performance levels comfortably exceeding any internal air pressures that are likely to be encountered in buildings.

FP* = Failure Pressure

For more detailed results click here.