Flat Aluminium Sheets | GA Aluminium | Order Aluminium Sheet

Flat Aluminium Sheet


To ensure our aluminium flat sheets are in pristine condition they are all supplied with a peelable protective film on one side. 

In addition to our standard size stock sheets we are also able to produce specially sized/formed aluminium panels in a variety of surface finishes. Please contact us with your requirements.

Before browsing the stock listings below you might find our brief summary of alternative surface finishes helpful in selecting the most suitable one for your chosen application.


Ano-Sil Anodised Aluminium Sheet

The extreme durability, corrosion resistance and light-fastness of the anodic finish provides an attractive metallic, easy to maintain aluminium sheet effect that will last for many years (Anodising is normally carried out after forming).

Satin Brushed Aluminium Sheet
This machine-polished brushed aluminium sheet effect gives a directional grained appearance that provides uniformity of finish while also helping to remove surface defects.

Mill Finish Aluminium Sheet
An economic, versatile and widely used semi-bright natural (untreated) aluminium sheet finish. In situations where aesthetic considerations are important, some sort of surface finishing to aluminium sheet is normally applied. Surface finishing can include powder coating, anodising (to suitable grades) and mechanical polishing.

  • Specification: Anodised = 5005
  • Specification: Satin Brushed / Mill = 1050A
  • Sheets supplied with one good side only
  • When ordering please use the GA code
  • Panel sizes can vary +/- 1%
  • Anodised items: Good face one side only. Shade variations may occur
  • Anodised items: Jig marks on full size sheets are normally no more than 12mm in from the edges
Our aluminium sheets can be ordered online today for prompt dispatch.
Bookmark and Share

Order your ...

Aluminium Flat Sheet: Anodised Finish

Aluminium Flat Sheet: Anodised Finish

Add to my project swatch
Panel Size Thickness Finish Order Code Enter Qty Price per item*  
2500 x 1250 1 mm Anodised GA SA10
£0.00 ex. VAT Buy Get free sample
2500 x 1250 1.5 mm Anodised GA SA20
£0.00 ex. VAT Buy Get free sample
* price per item varies according to the number of items ordered. All prices are excluding VAT.
Aluminium Flat Sheet: Mill Finish

Aluminium Flat Sheet: Mill Finish

Add to my project swatch
Panel Size Thickness Finish Order Code Enter Qty Price per item*  
2000 x 1000 1.2 mm Mill GA 1505
£0.00 ex. VAT Buy Get free sample
2500 x 1250 1.2 mm Mill GA 1537
£0.00 ex. VAT Buy Get free sample
2500 x 1250 1.5 mm Mill GA 1538
£0.00 ex. VAT Buy Get free sample
2000 x 1000 2 mm Mill GA 1507
£0.00 ex. VAT Buy Get free sample
2500 x 1250 2 mm Mill GA 1539
£0.00 ex. VAT Buy Get free sample
2000 x 1000 3 mm Mill GA 1509
£0.00 ex. VAT Buy Get free sample
2500 x 1250 3 mm Mill GA 1541
£0.00 ex. VAT Buy Get free sample
* price per item varies according to the number of items ordered. All prices are excluding VAT.
Aluminium Flat Sheet: Satin Brushed

Aluminium Flat Sheet: Satin Brushed

Add to my project swatch
Panel Size Thickness Finish Order Code Enter Qty Price per item*  
2500 x 1250 1.2 mm Mill GA B1412
£0.00 ex. VAT Buy Get free sample
2500 x 1250 2 mm Mill GA B1420
£0.00 ex. VAT Buy Get free sample
* price per item varies according to the number of items ordered. All prices are excluding VAT.
Size not shown or want a different finish?

We are able to provide aluminium in a range of surface finishes and supply most items cut to size and shape.

Send us your enquiry

Your Basket

0 item(s)
Total: £0.00
incl. VAT

View Basket

Free
Overnight Delivery

on all online orders

More about deliveries

Aluminium
Fabrication

high quality service

Go to Fabricated Products

GA Anodised Plain Sheet:
Independent Test Results

Resistance to Surface Marking:
26 passes compared with
1 pass for mill finish plain sheet

The above results show GAAnodised Plain Sheet being26 times more resistant to surfacemarking than a plain mill finish sheet.

For more detailed results click here

Light Reflective Values (LRV's) - Independent test results:

  • GA Ano-Sil Anodised: 58 LRV
  • GA Mill: Within range of 35-50 LRV (values dependent on variables including direction of measurement)
  • GA Satin Brush: Within range of 60-80 LRV (values dependent on variables including direction of measurement)
  • BS 8300:2001 Design of buildings and their approaches to meet the needs of disabled people, Code of practice.

Click here for more detailed test results.